Device Initialization makes all settings of your PHPoC product including a password initialize to default. Futhermore, all files stored in flash memory are deleted as well as certificate. Because of this, you have to backup your files before doing the device initialization.
Device Initialization Procedure
| Step | Action | Product State | STS LED |
|---|---|---|---|
| 1 | Run PHPoC Debugger | - | - |
| 2 | Set PHPoC to initialization mode(Use [Edit]>[Preferences] menu on PHPoC Debugger) | Enter Initialization mode after reboot | Blink rapidly |
| 3 | Keep pressing the function button over 10 seconds | Preparing initialization | Blink very rapidly |
| 4 | Check STS LED after 10 seconds | Initialization ready | Off |
| 5 | Release the function button right after the STS is OFF.(※ If you don't release the button within 2 seconds, the state go back to the step 3) | Progressing initialization | On |
| 6 | Rebooting automatically | Initial state | Off |